Name of trade

Name of trade (s) for which affiliation sought : ELECTRICIAN

Total Number of units: No. of units in I shift : 01

No. of units in II shift : 01

No. of units in III shift : 00

S. No	Name of the tools, equipment and machinery as per syllabus	Number required for Instructor and Trainees for one unit as per DGE&T norms	Total (units affiliated and sought affiliat- ion)	Total number actually available for all the units	Indicate shortage if any	Percent-age of availability (Item wise)
1	2	3	4	5	6	7
TOOL KIT
1	Rule wooden 4 fold 60 mm.	16	02	32	Nil	100%
2	Plier insulated 150mm.	16	02	32	Nil	100%
3	Plier side cutting 150 mm	16	02	32	Nil	100%
4	Screw Driver 100mm.	16	02	32	Nil	100%
5	Screw Driver 150mm.	16	02	32	Nil	100%
6	Electrician connector, screw- driver 100mm. insulated handle thin stem.	16	02	32	Nil	100%
7	Heavy duty screw driver 200mm.	16	02	32	Nil	100%
8	Electrician driver 250mm thin stem insulated handle	16	02	32	Nil	100%
9	Punch centre 150 mm x 9 mm.	16	02	32	Nil	100%
10	Knife double bladed Electrician.	16	02	32	Nil	100%
11	Neon Tester	16	02	32	Nil	100%
12	Rule steel 300mm.	16	02	32	Nil	100%
13	Saw tennon 250mm.	16	02	32	Nil	100%
14	Hammer, cross peen 115 grams with handle	16	02	32	Nil	100%
15	Hammer ball peen 0.75 kg. with handle.	16	02	32	Nil	100%
16	Firmer chisel wood 12mm.	16	02	32	Nil	100%
17	Gimlet 6mm.	16	02	32	Nil	100%
18	Bradawl	16	02	32	Nil	100%
19	Scriber 150 mm x Æ 4mm (Knurled centre position)	16	02	32	Nil	100%
20	Pincer 150mm.	16	02	32	Nil	100%
SHOP TOOLS, INSTRUMENTS & MACHINERY
1	C. Clamps 200mm, 150mm, 100mm.	02 each	02	02 each	Nil	100%
2	Spanner 150mm adjustable 15 degree.	02	02	02	Nil	100%
3	Blow lamp 0.5 liter.	02	02	02	Nil	100%
4	Melting pot	01	02	01	Nil	100%
5	Ladle	02	02	02	Nil	100%
6	Chisel cold flat 25mm x 200mm.	02	02	02	Nil	100%
7	Chisel wood firmer 25mm & 6 mm.	04	02	04	Nil	100%
8	Drill machine hand 0 to 6mm capacity.	01	02	01	Nil	100%
9	Electric drill machine portable 6mm capacity.	01	02	01	Nil	100%
10	Pillar Electric drill machine 12mm capacity.	01	02	01	Nil	100%
11	Allen key.	01set.	02	01set.	Nil	100%
12	Oil can 0.12 liter.	02	02	02	Nil	100%
13	Grease gun	01	02	01	Nil	100%
14	Out side micrometer 0 to 25 mm.	01	02	01	Nil	100%
15	Bench Grinder motorized	01	02	01	Nil	100%
16	Rawal plug tool and bit	02 set	02	02 set	Nil	100%
17	Pulley Puller	01	02	01	Nil	100%
18	Bearing Puller	01	02	01	Nil	100%
19	Hygrometer	02 sets	02	02 sets	Nil	100%
20	Techno-meter 0 to 100 deg. centigrade.	01	02	01	Nil	100%
21	Scissors blade 150mm.	04	02	04	Nil	100%
22	Crimping tool	01 set	02	01 set	Nil	100%
23	Wire stripper 20 cm	01	02	01	Nil	100%
24	Chisel cold flat 12mm	04	02	04	Nil	100%
25	Mallet hard wood 0.50 kg.	04	02	04	Nil	100%
26	Hammer Exeter type 0.40 kg.	08	02	08	Nil	100%
27	Hacksaw frame 200mm, 300mm adjustable.	04 (2 each)	02	04 (2 each)	Nil	100%
28	Square try 150mm blade	04	02	04	Nil	100%
29	Divider 150mm, outside & inside caliper.	02 each	02	02 each	Nil	100%
30	Plier flat nose 100mm.	04	02	04	Nil	100%
31	Plier gas round nose 100mm.	04	02	04	Nil	100%
32	Plier Gas 150mm.	04	02	04	Nil	100%
33	Tweezers 100mm.	04	02	04	Nil	100%
34	Snip straight 150mm.	02	02	02	Nil	100%
35	Snip bent 150mm.	02	02	02	Nil	100%
36	Spanner D.E. metric standard set.	02	02	02	Nil	100%
37	Drill hand brace 0 to 100mm.	04	02	04	Nil	100%
38	Drill S.S. Twist block 2mm, 5mm, 6mm set of 3.	04	02	04	Nil	100%
39	Plane, smoothing cutters, 50mm	04	02	04	Nil	100%
40	Gauge, wire imperial.	02	02	02	Nil	100%
41	File flat 200mm 2^nd cut	08	02	08	Nil	100%
42	File half round 200mm 2^nd cut.	04	02	04	Nil	100%
43	File round 200mm 2^nd cut.	04	02	04	Nil	100%
44	File flat 150mm rough.	04	02	04	Nil	100%
45	File flat 250mm bastard	04	02	04	Nil	100%
46	File flat 250mm smooth	04	02	04	Nil	100%
47	Rasp, half round 200 mm bastard.	04	02	04	Nil	100%
48	Iron, soldering 25 watt, 65 watt, 125 watt.	04 each	02	04 each	Nil	100%
49	Copper bit soldering iron 0.25 kg.	04	02	04	Nil	100%
50	De-soldering gun	04	02	04	Nil	100%
51	Vice hand 50mm. Jaw.	04	02	04	Nil	100%
52	Vice Table jaw 100 mm	08	02	08	Nil	100%
53	Vice Hand 50 mm jaw	04	02	04	Nil	100%
54	Pipe cutter to cut pipes upto 5 cm.dia.	04	02	04	Nil	100%
55	Pipe cutter to cut pipes above 5cm dia	01	02	01	Nil	100%
56	Stock and die set for 20 mm to 50mm G.I. pipe.	01 set	02	01 set	Nil	100%
57	Stock and dies conduit.	01	02	01	Nil	100%
58	Multi meter 0 to 1000 M Ohms, 2.5 to 500 volt.	06	02	06	Nil	100%
59	Digital Multi meter (3 ½ digits)	02	02	02	Nil	100%
60	A.C. Voltmeter M.I. 0-500 V. A.C.	01	02	01	Nil	100%
61	Milli Voltmeter centre zero 100-0-100 m volt.	01	02	01	Nil	100%
62	D.C. Milli ammeter 0-500ma	01	02	01	Nil	100%
63	D.C. Ammeter MC 0-1 A.	01	02	01	Nil	100%
64	Ammeter M.C. 0-5 A.	01	02	01	Nil	100%
65	Ammeter MC 0-15-25 A.	01	02	01	Nil	100%
66	A.C. Ammeter M.I. 0-5 A.	01	02	01	Nil	100%
67	A.C. Ammeter M.I. 0-15-25 A.	01	02	01	Nil	100%
68	K.W. Meter 0-1-3 Kw	02	02	02	Nil	100%
69	A.C. Energy meter (Single phase 5 Amp. 230V.)	01	02	01	Nil	100%
70	Single phase power factor meter	01	02	01	Nil	100%
71	Frequency meter	01	02	01	Nil	100%
72	Tacho meter with stop watch	02	02	02	Nil	100%
73	Current transformer	02	02	02	Nil	100%
74	Potential transformer	02	02	02	Nil	100%
75	Growler	01	02	01	Nil	100%
76	Tong tester/Clamp meter 0-100 Amp. AC	01	02	01	Nil	100%
77	Megger 500 volts.	01	02	01	Nil	100%
78	Wheat stone bridge complete with galvanometer and battery	01	02	01	Nil	100%
79	Relays-Over current, under voltage, etc. 3 volt, 100 amp.	02 each	02	02 each	Nil	100%
80	Contactor 3 phase, 440 volt, 16 amp. 2 NO & 2NC auxiliary contacts.	02	02	02	Nil	100%
81	Contactor 3 phase, 440 volt, 32 amp. 2 NO & 2NC auxiliary contacts.	02	02	02	Nil	100%
82	Limit Switch	02	02	02	Nil	100%
83	Rotary Switch 16A.	02	02	02	Nil	100%
84	Load bank 5 KW (Lamp/heater type)	02	02	02	Nil	100%
85	Brake test arrangement with two spring balance of 0 to 25 kg. rating.	02 set	02	02 set	Nil	100%
86	Knife switch DPDT fitted with fuse terminals 16 amp.	12	02	12	Nil	100%
87	Knife switch TPDT fitted with fuse terminals 16 amp.	12	02	12	Nil	100%
88	DC power supply 0 – 100 volt, 5 amp.	02	02	02	Nil	100%
89	Inverter 1 KVA Input 12 volt DC, Output 220 volt AC with 12 battery.	01	02	01	Nil	100%
90	Voltage stabilizer – Input 150-230 volt AC, Output 220 volt AC	01	02	01	Nil	100%
91	Rheostat 0 – 1 Ohm, 5 Amp., 0 – 10 Ohm, 5 Amp, 0 – 25 Ohm, 1 Amp., 0 – 300 Ohm, 1 Amp.	02 each	02	02 each	Nil	100%
92	Domestic appliances: - (a) Electric hot plate 1500 Watt. 220V. with temperature control	02	02	02	Nil	100%
	(b) Electric kettle, 1000 Watts 230V.	02	02	02	Nil	100%
	(c) Electric iron 1200 watts, 220V. with temperature control.	02	02	02	Nil	100%
	(d) Immersion heater 750/1000/1500 W., 230V.	02	02	02	Nil	100%
	(e) Geyser 25 litre 240 V. (Storage type).	01	02	01	Nil	100%
93	Flux meter	02	02	02	Nil	100%
94	Laboratory type induction coil 6 volt to 800-10,000 volt.	01	02	01	Nil	100%
95	3-Point D.C. starters.	01	02	01	Nil	100%
96	4-point D.C. starters.	01	02	01	Nil	100%
97	Cut out, reverse current, over load voltage relays.	01 each.	02	01 each.	Nil	100%
98	Starter for 3-phase, 400 V. 50 cycles, 2 to 5 H.P. A.C. motors :- (a) Direct on line starter.	01	02	01	Nil	100%
	(b) Star delta starter with manual, Semi-Auto and Automatic.	01	02	01	Nil	100%
	(c) Auto transformer type starter.	01	02	01	Nil	100%
99	Electrical machine trainer :- Suitable for demonstrating the construction and functioning of different types of D.C. machines and A.C. machines (single phase and three phase). Should be complete with friction brake dynamo meter, instrument panel and power supply units.	01 per institute	02	01 per institute	Nil	100%
100	Motor Generator (AC to DC) consisting of :- Motor induction squirrel cage, 7 HP 400 volts, 50 cycles, 3-phase with star delta starter and switch directly coupled to DC shunt generator 5 KW 440 volts and switch board mounted with regulator, air circuit breaker, ammeter, voltmeter knife blade switches and fuses, set complete with case iron and plate, fixing bolts, foundation bolts and flexible coupling.	01	02	01	Nil	100%
101	Motor Generator (DC to AC) set consisting of :- Motor shunt 5 HP., 440 volts with starting compensator and switch directly coupled to generator AC 3.5 KVA., 400/ 230 volts, 3-phase, 4 wire, 0.8 PF 50 cycles with exciter and 1switch board mounted with regulator, circuit breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. Set complete with cast iron bed plate, fixing bolts, fixing bolts, foundation bolts, & flexible coupling.	01	02	01	Nil	100%
102	Used DC Generators-Series, Shunt, and Compound type for overhauling practice.	01 each	02	01 each	Nil	100%
103	D.C. shunt generator 2.5 K.W. 220V. with control panel.	01	02	01	Nil	100%
104	DC compound generator, 2.5 K.W. 250V. with control panel including filed rheostat, voltmeter, ammeter and circuit breaker.	01	02	01	Nil	100%
105	Diesel generator 5 KVA, 440 V. AC 3 phase with change over switch, over current circuit breaker and water-cooled with armature, star-delta connections.	01	02	01	Nil	100%
106	Motor series D.C., 220 volt, 0.5 to 2 HP. Coupled with mechanical load.	01	02	01	Nil	100%
107	Motor shunt D.C., 220 volt,2 to 3 HP.	02	02	02	Nil	100%
108	Motor DC compound-would 220 volt, 2 to 3 HP with starter & switch.	02	02	02	Nil	100%
109	Motor of AC squirrel cage, 3-phase, 400 volt, 50 cycles, 2 to 3 HP with star delta starter and triple pole iron clad switch fuse.	01	02	01	Nil	100%
110	Motor AC phase-wound slipring type 5 HP 400 volts, 3-phase, 50 cycles with starter and switch.	01	02	01	Nil	100%
111	Motor AC series type 230 volt, 50 cycles, 1/4 HP with mechanical load.	01	02	01	Nil	100%
112	Motor AC single phase, 230 volt. 50 cycles 1 H.P. capacitor type with starter switch 1 HP.	01	02	01	Nil	100%
113	Motor universal 230 volt, 50 cycles 1/4 HP with starter/ switch.	01	02	01	Nil	100%
114	Stepper motor with digital controller	01	02	01	Nil	100%
115	Fan A.C. 230 volt 1200mm	02	02	02	Nil	100%
116	Transformer single phase, 1 KVA 230/115-50-24-12 volts, 50 cycles core type, air Cooled.	03	02	03	Nil	100%
117	Transformer three phase, 5 KVA 440/230 volts, 50 cycles, delta / star, shell type oil cooled.	02	02	02	Nil	100%
118	Variable auto transformer 0-250V. 8 amps.	02	02	02	Nil	100%
119	Oscilloscope –Dual Trace, 30 MHZ	01	02	01	Nil	100%
120	Function Generator	01	02	01	Nil	100%
121	Discrete component trainer	01	02	01	Nil	100%
122	Linear I.C. Trainer	01	02	01	Nil	100%
123	Digital I.C. Trainer	01	02	01	Nil	100%
124	Bath impregnating	01	02	01	Nil	100%
125	Oven Stoving	02	02	02	Nil	100%
126	Oil testing kit	01	02	01	Nil	100%
127	Battery charger with variable output 1 KW	01	02	01	Nil	100%
128	Hydrometer	01	02	01	Nil	100%
129	A.C.B. 5 KVA	01	02	01	Nil	100%
130	M.C.B. 16 amp.	01	02	01	Nil	100%
131	Thyristor/IGBT controlled D.C. motor drive 1 HP with tacho-generator feed back arrangement.	01	02	01	Nil	100%
132	Thyristor/IGBT controlled AC. motor drive VVVF control, 3 phase, 2 HP.	01	02	01	Nil	100%
133	Lockers with 2 drawers (standard size)	02	02	04	Nil	100%
134	Bench working 2.5 x 1.20 x 0.75 meter	04	02	04	Nil	100%
135	Almirah 2.5 x 1.20 x 0.5 meter	01	02	01	Nil	100%
136	Instructor’s table	01	02	01	Nil	100%
137	Instructor’s Chair	02	02	02	Nil	100%
138	Fire extinguisher	02	02	02	Nil	100%
139	Fire buckets	04	02	04	Nil	100%
140	Metal rack 100 x 150 x 45 cm	04	02	04	Nil	100%

NOTE:-

1. For each unit a trainee tool kit fromSl.No.1 to 19 of “Tool Kit” and locker is required.

2. If two units are working simultaneously in any shift, additional shop’s General Outfit, item from Sl. No. 1 to 98 of “Shop Tools” Instruments & Machinery” is required for second unit.

3. For each two units in a shift, one set of Machinery& Equipment form Sl. No. 99 to Sl. 140 are required.

ooo

Back

S. No

1

TOOL KIT

SHOP TOOLS, INSTRUMENTS & MACHINERY

Domestic appliances: -